Original post on ILFORD
A CHRONIC CASE OF GAS
To cut a long story short. In a previous life, i.e. before kids, I suffered a chronic case of GAS (Gear Acquisition Syndrome) and ended up as the proud owner of a Richard Ritter 7×17” Ultra Large Format View Camera. As every GAS sufferer believes, buying your way out of limited talent is the only path to follow. The plan was to produce stunning panoramic negatives for Platinum/Palladium contact printing. The combination of huge negatives, old school contact printing and expensive emulsions was surely all I needed to elevate my photography to where it deserved to be…
MANY MISTAKES
To be completely honest, and as you’ve probably guessed, I bit off rather more than I could chew. I wasn’t a novice at handling sheet film, or the processes of Large Format, or printing in the darkroom. However, I wasn’t ready for the daunting task of managing everything that comes with Ultra Large Format.
Fundamentally it’s not too complicated, but that doesn’t mean it’s not difficult. Many steps need to be taken, in exactly the right order, with meticulous care and attention to detail all whilst handling a camera, lenses, tripod, film holders and film that are very large, heavy and cumbersome. One misstep at any point and the mistake is exaggerated many fold, with the usual outcome a ruined negative and a waste of a lot of time, money and effort. Having only 3 double film holders meant any shoot was limited and the whole cycle of shooting, developing, reviewing and learning was lengthy and time consuming.
The mistakes were many. Film handling issues resulted in fingermarks, smudges, dust, scratches and density problems. Camera handling issues led to terrible focus control across the image, poor composition, flare and light leaks. All in all the experience was terrible and frustrating and when our much longed for family arrived on the scene it was all the excuse I needed to pack it all away and forget about it.
Door-Pinhole-FP4
OLDER AND WISER
Over a decade later, older and wiser, and armed with the words of “The War of Art” by Stephen Pressfield I’m ready to start doing the work to try and achieve what I originally started.
In the two months since plucking up enough courage to have another go I’ve gone from not shooting film in years to shooting 4×5 and 7×17 film. I no longer have a darkroom, but I’ve developed, scanned, processed and printed them digitally. I’ve also managed to print some Platinum/Palladium prints. By taking a step at a time, learning from the mistakes and slowly gaining knowledge and experience I’ve begun to make some progress. The negatives are functional and the prints are passable. They are not great, or even good, but they are at least results to encourage me on my way. I know I have a long way to go, but I now have an idea of how I might get somewhere towards where I want to be.
TwistedChestnut-7×17-HP5-Neg
TwistedChestnut-7×17-HP5-Platinum Paladium
TwistedChestnut-7×17-HP5
FILM CHOICE
I’ve always shot Ilford films. For me the traditional FP4 Plus and HP5 Plus films give lovely tones and grain and allow a small margin of error for my sloppy technique. The robust base and emulsions are a great help for ULF with the increased risk of handling damage.
The fact that Ilford do a yearly ULF and Custom format run is a god send and long may it continue. I did some quick tests of some of the 10 year expired film I have stashed away and there appears to be no degradation or much loss of speed. I have ordered a couple of boxes of FP4 Plus though as I’m out of that but let’s hope I’m still doing this in 12 months time and need to order some more next year and that Ilford are still supporting us ULF fans.
7X17 FILM HANDLING
- Loading film in a Harrison Jumbo film tent on the dining room table
- Develop film in Moersh Finol in a JOBO 2850 (2 at a time) in the kitchen on a home made roller for slow and random rotation
- 2 part scan on Epson V700 flatbed
- Pano merge and process in Affinity Photo
- Pigment printing from The Print Space
Iken-7×17-FP4
PT/PD PRINTING
- Bostick and Sullivan Pt/Pd kit with Na2 for contrast control
- 8×10 and 7×17 contact printing frames
- Arches Platine paper
- 4 tube UV Tanning Lamp is ok for 4×5 negatives in 8×10 frame
- Lamp not big enough to give even exposure for 7×17 so use a Syrp Genie device to track the Lamp across the 7×17 frame and negative with adjusted exposure timing. 42 minutes (overall) for Twisted Chestnut 7×17 Pt/Pd
- Develop and Clear in Kitchen
- Wash in the garden
- Willis-Pinhole-FP4-Platinum Paladium
- Willis-Pinhole-FP4
Willis-Pinhole-FP4-Print
Images ©Andrew Keedle
ABOUT THE AUTHOR – Andrew Keedle
BIO
Old, grey and grumpy. Former software developing, family man cyclist. Now trying to make something of making images, both still and moving.
LINKS
https://www.instagram.com/apkeedle/
https://twitter.com/apkeedle
https://www.keedlemedia.com/blog
https://www.etsy.com/uk/shop/KeedleImages
